Best Whole House Water Filter System 2019

By Thomas No comments

Have you ever been taken ill by a waterborne disease such as typhoid? You do not wish to contract one or have another experience with the pangs and the financial implications of such a disease. But how will you stay immune from waterborne diseases? Get one of the Best Whole House Water Filter System.

• The Aquasana Gallon

 This water filter requires low levels of maintenance and has the capacity to hold up to 10,000 gallons of water. This system is very effective since it can expunge almost 98% of chlorine, providing safe drinking water. It also kills 99.99% of the bacteria present in the water.

• Top Tier Supreme System

 The Lead-free chrome valve is the most outstanding feature in this System. Because of this aspect, it is able to provide pure and uncontaminated water for human consumption. Apart from lead, it also removes other contaminants present in water such as heavy metals.

• iSpring 6-Stage Filter

 This system provides safe water through reverse osmosis. It also removes more than 1,000 water contaminants which include hormones, sodium, lead, asbestos, fluoride, bacteria, and many more. Its filter system has a layer of 6 stages of water filtration, hence, quite effective in water filtration.

• 3M Aqua-Pure System

 With a filtration rate of almost 80 liters per minute, the system is suitable for larger homes and some medium-sized commercial installations. Using cartridges in water filtration, this system is designed to lessen the taste of chlorine in water and also reduces odor present in water through its carbon filters Made from stainless steel, this device is rust-free hence saving costs of frequently repairs or replacements.

In conclusion

Clean water is very essential for every home daily operation. To get safe water, buy any of these water softeners mentioned above or you can read more water softener reviews from our expert’s team.

Did you like our article? Then be sure to leave your comment below. For further reading, hit the links below.

5 Easy Methods to fix a Leaky or Runny Toilet

By Thomas No comments

Leaky or runny toilets can really be hectic especially when you have visitors or when you just want to use the toilet urgently. Most toilets get leaking or runny issues when there’s much clogging within. Getting a plumber is also quite challenging or tricky at times, especially when it is very late at night. One of the most common causes of a running toilet is usually a flapper which doesn’t seal or if the flapper is shot. The fixes can be straightforward even if you do not have any plumbing experience, as long as you know what the issue is.

Runny Toilet Basics

There are some basics you need to have when fixing your toilet, such as the plumbing tools, toilet fill valve, openers such as pliers, hacksaw.

How to fix Leaky or Runny Toilets

Step 1: Test the toilet Flapper

When you hear the water running in the toilet, you need to push down the flapper with an object such as a stick until it stops. The flapper may not be sealing properly if it stops, and it would be therefore important to replace it. You can also check the fill tube length and cut it to a half inches over the water line.

Step 2: Look for a Leak in the fill valve.

Look for a leak in the fill valve when you flush the toilet. You can also lift the arm of the toilet as it fills to check whether the water flow will stop. Adjust the float arm in such a way that the water stops flowing when the water level is at 1/2 or at least 1 inch below the overflow pipe. If the leakage continues, you can replace the fill valve.

Step 3: Install a new Fill Valve.

Once you get a new fill valve, insert it as detailed in the instructions and also ensure to fasten the locknut at a half turn tight. If the overflow pipe is higher than the fill valve even at maximum height, you can opt to shorten it with a cutter or hacksaw. This is because it needs to be 1 inch lower than the critical level.

Step 4: Connect/ Fix the Fill Tube

Attach a new fill tube to one end to the nipple of the fill valve and the other end to the enclosed angle adapter. This adapter can also be clipped to the overflow pipe. Finally attach the flapper chain to the flush lever then turn the water on to test if it is fixed.

Final Verdict

When fixing the toilet on your own, it is important to ensure that you have all the tools you need just before you start the DIY process. It is also very important to ensure you completely close the water flow to avoid any mess. When it comes to replacement of parts such as the flappers or even fill valves, it is also important to inquire from professionals as not all may be compatible. You can also confirm and verify the exact connections just before removing a replacement part to ensure perfect fixing. This is because improper fixing even during replacement can cause the leakage issues. However, if all this doesn’t work, you can just opt for a plumber.